Industrial telemetry and measurement
Monitor your equipment and processes without complex IT infrastructure. Onyx M3 provides the Edge server, instruments, cables, connectivity and support.
Field industrial expertise · Local acquisition · LTE or satellite communications · Remote support
Two deployment modes
The same infrastructure can document a short-term issue or monitor an asset throughout its useful life. Hardware and configuration are adapted to the duration, site and required data.
Rent a preconfigured system to document a problem, perform an audit or measure results before and after a change.
Monitor equipment continuously, retain its history and receive the information needed to act before drift becomes critical.
Complete infrastructure
Onyx M3 selects, assembles, configures and supports the components as one system. You get a coherent measurement chain without coordinating several technical suppliers. Every point is tied to useful data and a clear responsibility.
Sensors, meters, modules, cables and connectors suited to the application.
Local acquisition, processing and storage, close to the equipment.
Local, LTE or Starlink access based on coverage, network availability and site constraints.
Configuration, support, controlled updates and remote diagnostics.
Measurements and applications
Telemetry does not begin with a dashboard. It begins with a useful signal, a representative measurement point and an acquisition frequency suited to the decision.
Pressure and flow · Temperature and humidity · Level · Dew point
Current, voltage, power and energy · Vibration · Operating states
4–20 mA signals · Modbus RTU · Modbus TCP · Compatible contacts and pulses
Sensor, module and acquisition-frequency selection is validated for every application.
See measurement applied to compressed air audits→
Data and dashboard
View data locally or remotely, then use the history to identify drift, compare periods and document decisions.
Fully managed service
The service covers the system as a whole, from initial configuration to remote adjustments. The exact scope of support, maintenance and replacement is defined in the quote or contract.
Deployment
Each system is preconfigured and rapidly deployable. Electrical or mechanical work requiring qualified personnel remains planned under the rules applicable to the site.
We clarify the decision to support, measurement ranges and operating conditions.
Instruments, protocols, cables and communication methods are selected for the application.
The Edge server, acquisition and dashboard are prepared before mobilization.
After commissioning, selected views and thresholds can be adjusted with the customer team.
The customer does not have to build or maintain new IT infrastructure to start measuring.
Knowledge base
Use the knowledge base to learn more about communications, sensors, installation, security and data management.
Describe the equipment, required parameters and site communication conditions. Onyx M3 will determine the appropriate sensors, modules and deployment type.
Discuss my application→